A neoprene repair kit for small wetsuit splits and tears, not surfboard dings. Use it when you need a flexible waterproof bond on rubber or neoprene.

The Surfboard Studio's Wetsuit Repair Kit is designed for surfers who need a quick repair to keep their wetsuit watertight. The Wetsuit Repair Glue is designed to cure to a flexible elastic rubber ensuring a solid permanent, waterproof bond for any small splits or tears in your wetsuit. For larger repairs, the included neoprene patch can be used. Designed for use with neoprene and rubber, the glue cures within 24 hours, ensuring your wetsuit remains watertight and extending the life of your wetsuit.  

CONTENTS:

•  Wetsuit Repair Glue (15ml)  
•  1 x Applicator Brush
•  1 x Neoprene Patch (1mm)  
•  2 x Iron-on Neoprene Tape (1mm)   
•  1 x Strip of Heat Shielding Paper (For Ironing On) 
•  1 x Large Eye Sewing Needle plus Nylon Thread

DIRECTIONS:

• Preparation: rinse damaged section with fresh water and allow suit to fully dry. Lay suit flat and align torn edges so they meet cleanly without overlapping.

• Apply glue: using the included applicator brush, apply a thin, even layer of the Wetsuit Repair Glue to both sides of the tear. Allow glue to become tacky (usually takes only a few minutes), then firmly press edges together to create a strong bond.

• Reinforce: if needed, for larger tears, use the included neoprene patch by placing over the inside of the repair and glue it using the Wetsuit Repair Glue. Alternatively, use the iron-on neoprene tape for added strength (particularly useful for seams) or stitch the area using the included needle and nylon thread before sealing with the Wetsuit Repair Glue.

• Cure & Seal: allow the repair to cure for up to 24 hours in a dry, ventilated area. Once fully cured, the glue forms a flexible, waterproof seal.

HAZARD IDENTIFICATION:
Neurotoxic risk – Wetsuit glue can contain high amounts of Toluene which is neurotoxic if inhaled or absorbed through skin.
Flammable – This product is classified as highly flammable.
Irritation – Contact with skin or eyes will cause serious irritation.
Respiratory impact – inhalation will cause respiratory tract irritation, dizziness and possible drowsiness.

SAFE HANDLING:
Always use in a well-ventilated area.
Wear Nitrile gloves and safety goggles to prevent direct contact with skin and eyes
It is recommended that a respirator (rated for organic vapours) is used in cases of prolonged use of/exposure to this product.
Wash hands thoroughly after use. 
Do not consume food or drink while using this product.

EMERGENCIES:
Eye contact – immediately flush with water for 15 minutes; seek medical attention immediately.
Skin contact – wash area thoroughly with soap and warm water.
Inhalation – immediately move to fresh air; if symptoms such as dizziness and drowsiness persist, seek medical attention.
Ingestion – do not induce vomiting. Rinse mouth and seek immediate medical attention.

STORAGE: 
Store in a cool, dry space between 18 and 32 degrees Celsius. 
Always ensure container is tightly sealed. 

DISPOSAL:
Always dispose in accordance with local hazardous waste regulations. 
Do not pour down drains.